AutoPrint 3.08
for Windows 95/98/NT/2000/XP
since 1998

You know one of these problems ?  

- You’d like to send text or graphic files directly to a certain printer but you don’t want to open huge
  applications first
- Your DOS-application runs quite well on the Windows-PC, but print-out is no more possible. 
- You can´t find a tool to transfer a printout from your DOS- or ANY-OS-application to a Windows
  based network printer.
- You are receiving a lot of text or graphic files and you don’t have the time to print them manually.
- You receive many PDF-documents and need to print them manually file by file.

Solution: 
 
AutoPrint automatically batch prints nearly any printable file, including several standard bitmap graphic file types.

+ Good old DOS-jewels now have - if print-file output is possible - access to one or more Windows-printers. 
+ Optionally for each printer one or more optional static ESC initialization strings may be defined.
+ Access any shared printer in your local network.
+ Transfer BMP, JPG, TIF(including multi-page) and G3N bitmap image files to any Windows-printer.
+ Multiple standard page layout setups can be defined for each printer.
+ TXT and RTF files are transferred through a Windows canvas.
+ NEW PDF documents can be printed through Adobe Acrobat/Reader in a background procedure.
+ NEW MS Word DOC files and similar documents like WRI or WPD can be printed through MS Word or equivalent
+ After successful output the print-files are deleted automatically or saved in a certain folder. 
+ AutoPrint optionally runs minimized in the system tray .

 

How AutoPrint works: 
 
AutoPrint runs in the background on a local workstation or on a LAN server. On a dedicated computer one or more special file folders are assigned - depending on the number of printers to address through AutoPrint. 
Each folder is reserved as a file container for one of these printers, multiple folders for one singular printer are also possible. These folders may be defined as public and are so far accessible for by all operating systems within the local network. Some user-application now sends a file to print (e.g. dosapp.prn) into one or more of these folders. 
AutoPrint will pick up this file and send it to the corresponding printer and delete it finally.

Text-files (*.txt) and Rich Text formatted files (*.rtf) are handled by AutoPrint directly.

Image-files (*.bmp, *.jpg, *.tif, *.g3f) are also converted and transferred by AutoPrint.

The printout of pure ASCII text-files (like *.bat, *.ini, *log) will be done with the printers standard build-in font or - if defined - with an alternative internal printer font defined by an individual initialization string. 

PDF-document-files are printed through the rendering engine of Adobe Acrobat or Adobe Reader in a background task. So you stay always up-to-date with the newest
PDF-standard by updating your Adobe tools.

MS Word documents (*.doc) and related files are printed through MS Word. Therefore MS Word or an equivalent application like Word Viewer must be installed on the same computer if this file type shall be handled.

Raw print-files (like *.prn or any other) have to be built for a certain printer type. That means, the generating application has to deal with its internal printer drivers first!

Install: 
The file aprinti.exe is a self-executing archive.  Please copy this file into any temporary folder on your hard disk. Then launch this program and follow the instructions. After successful installation you should save the original setup file for later use. 

Deinstall: 
As standard in Windows: System-Control-Software-AutoPrint <Remove> 

Version history & Bug fixes:
2.04
- application start-up problem after installing AutoPrint the fist time
2.05
- bug-fix: TIF (certain FAX-formats) printout-freeze
- bug-fix: timing problem on NT/2000 with non-admin users
3.01
- additional file formats included: G3N (Fax), G3F (Fax), RTF
- enhanced graphic print page settings
- improved help system
3.02
- PDF support added
- bug-fix: number of copies now handled
3.03
- bug-fix: PDFs printed 2 copies to standard printer only
3.04
- bug-fix: periodic high CPU load while searching new files
3.05
- advanced log-file settings
- printed files may be saved now
3.06
- MS Word DOC support added
3.07
- bug-fix: MS Wordviewer printout failed
3.08
- new Adobe Reader 8 support added

System requirements: 
- Windows 95/98/NT/2000/XP
- Adobe Acrobat or Reader 7 or higher if PDF-printing is needed
- MS Word or equivalent if DOC-printing is needed
- Pentium compatible CPU or higher 
- 3 MByte free disk memory for the program 
- Sufficient disk space for temporary storage of the print-files 
 

How to register AutoPrint: 

The unregistered version stops its activity after each 10 print-outs. However, the program may be started as often you like. In this way AutoPrint is FREE for occasional users and no registration is necessary.

AutoPrint can be registered for unlimited operation for only

                                     US$ 35.-

You will need one license for each installation. If you install AutoPrint on a network server just one license is necessary. Therefore a server installation may be more interesting than multiple workstation installations.


 


The easiest way is to register online through our partners regnow or share*it! (fastest key delivery), many payment options are available.
For alternatives or discounts please contact us via e-mail.

Special notes for updaters:

The update from all registered previous versions is free ! Your previous settings including the registration status will be maintained. Install the new version into any new or existing AutoPrint directory, uninstall is not necessary.

If you were previously running AutoPrint 2.xx as a NT/2000/XP-service, you need to stop it’s activity first, then remove the service installation, before installing the new version. The service may be stopped and removed from within the old version 2.xx when launched as a visible application.